Industrial SLS
Made Accessible
Form Studio 1 is the first affordable, professional-grade resin 3D printer with a powerful, long-lasting print engine and an open platform. Print most parts in under two hours with razor-sharp detail and a workflow that's safe, reliable, and mess-free from start to finish. Paired with Alpha Resins and the Formlabs VOC Extractor, Form Studio 1 is the first and only resin printer with UL GREENGUARD Certification for low chemical emissions.
-
Blazing fast: most parts print in under two hours, with speeds up to 130 mm/h on Alpha Fast Resin.
-
Amazing parts: a 35 µm pixel, anti-aliasing, and resins tuned to the light engine deliver sharp edges and smooth surfaces.
-
Automatic resin handling: integrated, hands-free dispensing with glove-free material swaps in under a minute.
-
Open platform: Open Material Mode is included, so customers can print in any 405 nm resin with no license fee.
-
Reliable by design: five intelligent control systems monitor temperature, resin level, print force, and print status on every job.
Form Studio 1 is the most accessible SLA printer yet, built to bring an entirely new audience into the Formlabs ecosystem
.png)
Form Studio 1 is the first affordable, professional-grade resin 3D printer with a powerful, long-lasting print engine and an open platform. Print most parts in under two hours with razor-sharp detail and a workflow that's safe, reliable, and mess-free from start to finish. Paired with Alpha Resins and the Formlabs VOC Extractor, Form Studio 1 is the first and only resin printer with UL GREENGUARD Certification for low chemical emissions.
-
Blazing fast: most parts print in under two hours, with speeds up to 130 mm/h on Alpha Fast Resin.
-
Amazing parts: a 35 µm pixel, anti-aliasing, and resins tuned to the light engine deliver sharp edges and smooth surfaces.
-
Automatic resin handling: integrated, hands-free dispensing with glove-free material swaps in under a minute.
-
Open platform: Open Material Mode is included, so customers can print in any 405 nm resin with no license fee.
-
Reliable by design: five intelligent control systems monitor temperature, resin level, print force, and print status on every job.
Production Batches
3280 Parts (41.5 hours)
High Mix Builds
29 Parts (22.5 hours)
Full Scale Prototypes
3 Parts (21 hours)
Form Studio 1 SLA Ecosystem
_STORE.png)
Form Studio Wash+Cure
Form Studio Wash+Cure is an all-in-one, compact, and affordable post-processing unit that handles both washing and curing for your resin 3D prints.
-
Washing mode: All resin 3D printed parts need washing to remove residual resin. Form Studio Wash+Cure agitates IPA or alternative solvents around parts for thorough, efficient cleaning. When washing is done, simply raise the internal basket out of the solvent to let parts air dry and avoid over-soaking, warped prints.
-
Curing mode: Using 405 nm light, Form Studio Wash+Cure completes the chemical reaction started during printing. Post-curing boosts part strength, toughness, heat resistance, and creep resistance, while leaving a harder, less tacky surface.
-
Solvent compatibility: works with IPA, TPM, and Resin Washing Solution.
VOC Extractor
VOC Extractor is a compact add-on that reduces volatile organic compound levels while your printer runs. Air passes through two carbon filters, lasting roughly 330 hours of print time and replaceable in seconds. Three fan speeds let you match airflow to your needs.
-
Carbon filtration: air passes through a pre-filter, then two activated carbon HEPA filters; each filter lasts roughly 330 hours of print time and replaces in seconds.
-
Three flow settings: 7, 12, and 19 CFM to match hose routing and materials.
-
Runs only during printing and vents clean air out of the unit.
Alpha Resins
The Alpha Resins are the first resin printing materials to achieve UL GREENGUARD Gold*, an independent standard certifying low VOC emissions for homes, offices, schools, and other indoor environments. This certification is for the printing process - not just for a final part.
-
Materials: Alpha Grey, White, Black, Clear, Fast, and Model.
-
Safety: Printed on Form Studio 1 with the VOC Extractor, Alpha Resins are the first and only 3D printing resins with UL GREENGUARD Gold certification for low chemical emissions.
-
Compatibility: Alpha Resins run only on Form Studio 1 and are not compatible with Form 4/4B or Form 4L/4BL.
*when printed on Form Studio 1 using VOC Extractor.
