Form Wash and Form Cure
Form Wash
Automate Cleaning with Form Wash.
Parts travel straight from the Form 3 to Form Wash.
Opt to go glove-free and keep parts directly on the build platform.
SET IT AND FORGET IT
Simply set the appropriate time and let
Form Wash get to work.
15 MINUTES
Approximate wash time when using fresh isopropyl alcohol (IPA)
8.6 LITERS
IPA volume for removable wash bucket
70 PRINTS
Amount of prints per IPA refill in regular use

While you’re away, parts are precisely agitated in IPA, getting every nook and cranny perfectly clean.
A Consistent, Automated Workflow - Once washing completes, Form Wash automatically lifts parts
out of the IPA,avoiding over-soaked, warped prints. Parts are air dry and are ready when you are.

Form Cure
UNLOCK PEAK PERFORMANCE
Form Cure is finely tuned to bring parts to their maximum mechanical properties
80 DEGREES CELSIUS
An advanced heating system precisely controls
curing temperatures up to 80 °C
405 NANOMETERS
13 multi-directional LEDs emit the optimal
wavelength of light for curing Formlabs materials
1 REVOLUTION PER MINUTE
A rotating turntable provides uniform exposure
during post-curing
Form Cure’s turntable rotates to provide uniform exposure.
The heating system preheats the chamber to get parts ready for optimum post-curing.
Once time is up, parts are fully cured and ready for peak performance.